Licensed & Insured, in Tacoma and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
🎁 10% off your first service · 30-day offer
Your Free Quote Request
All your work handled by qualified professionals in Tacoma
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
Travel included · Free estimate within 24h
Tacoma Metal Roofing is a team of local certified professionals based in Tacoma. We respond quickly in Tacoma and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (253) 276-7144⭐⭐⭐⭐⭐ 4.9/5 · 251 verified Google reviews
“Had them put a metal roof on our detached garage, about 600 square feet. Crew of three knocked it out in a day and a half and the cleanup was so good I couldn't even find stray screws in the grass. Really relieved to finally have that done.”
Metal Roof Installation
“We wanted the copper awning over our front door redone to match the brick, and these guys clearly knew what they were doing with specialty metal. The seams are tight, the patina already looks great, and they treated our 1920s house with real care. Worth every penny.”
Copper & Specialty Metal Roofing
“Our old barn roof was leaking in three spots and I figured it was a goner. They re-fastened panels, replaced a bunch of screws, and fixed the flashing around the cupola instead of pushing a full replacement. Honest work at a fair price, I'll use them again for the shop building.”
Commercial & Agricultural Metal Roofing
“Standing seam install on our 2,200 sq ft house. The crew was polite, showed up when they said they would, and the dark bronze finish looks amazing against the trees. Only gripe is they started a couple days later than originally quoted, but the work itself is flawless.”
Standing Seam Metal Roofing
“Water was coming in around our chimney every time it rained hard. They found the failed flashing, replaced it, and sealed everything up properly. Two storms since and not a drop inside. Grateful I called them instead of messing with it myself.”
Chimney & Skylight Repair
“Full replacement on our ranch house, and honestly it looks like a brand new home. They tore off the old roof, cleaned up every single day, and finished in four days flat. The foreman walked me through everything at the end, no surprises on the invoice either.”
Metal Roof Replacement
“Called them for an inspection after a windstorm and they were out within two days. Turned out a few panels had loosened and some screws were backing out, so they re-fastened everything and replaced the damaged ones on the spot. Quick, fair, and no upsell pressure.”
Metal Roof Inspection
“We went with the retrofit over our existing shingles to save money and I was skeptical, but the crew explained the whole process and the finished roof is solid and quiet. Took them about three days on our 1,800 sq ft place. The gutters they added for the metal roof were a nice touch too. Would recommend.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in Tacoma · Each image shows the final result achieved for our clients
| Service | Starting from | Description |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for Tacoma homes, shops and outbuildings: panel systems chosen for a wet Puget Sound climate, installed over a quality synthetic underlayment with proper ventilation, careful flashing and details built for decades of rain, moss and salt air. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Tacoma homes. Panels roll-formed to length and mechanically seamed or snap-locked, so there are no exposed screws to leak under months of rain, and rain sheds cleanly with less room for moss to hold. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of moss-eaten shingle, worn shake or end-of-life metal roofs: old roofing hauled away, decking inspected and any soft, rain-damaged boards repaired, then a complete new metal system installed. Ask your insurer whether an impact-rated or fire-resistant roof earns a discount. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles: no tear-off, less waste, lower cost. Popular on Tacoma ranches and split-levels. We check deck condition and moisture first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing panels dented by fallen limbs, resealing seams and penetrations, and fixing failed flashing before a long wet winter turns a small gap into interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and wall transitions) and fixed right, not just caulked over. Emergency tarping available after heavy atmospheric-river rain and winter storms. |
| Screw Replacement & Re-Fastening | From $750 | Constant wet-dry cycles and temperature swings loosen fasteners, and rain-soaked washers harden and crack on older exposed-fastener roofs around Tacoma. Oversized screws and weather-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V): the budget-friendly workhorse for homes, carports, barns and workshops across Pierce County. Quality panels in durable colors, installed with proper screw patterns and closures that keep out wind-driven rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of cedar shake, slate or architectural shingles with the lifespan of steel: a favorite for Tacoma homeowners who want metal performance without the standing seam look. Lightweight, walkable and moss-resistant. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: strong wind and impact performance, good fire resistance, and shake and tile profiles that suit Tacoma's Craftsman and Tudor streets. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that age gracefully in marine air and can last for generations. Custom fabrication for the fine details of historic Tacoma homes. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of faded, chalking or surface-rusted metal roofs: moss and algae cleaning, surface prep, rust treatment and a high-performance coating system that restores color and extends roof life without replacement. Done right it protects from constant Tacoma moisture. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and wall transitions: the number one leak point on Tacoma roofs under months of rain. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Snow guards and rail systems for metal roofs: Tacoma only sees occasional wet snow, but a steep slope over an entry or walkway can drop it all at once. Honest guidance on whether yours needs them, and when a snow load on a hillside home is worth planning for. |
| Storm & Wind Damage Repair | Free inspection | Repair of wind, fallen limb and winter storm damage to metal roofing: thorough documentation with photos, honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating, moss growth and wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry heavy Puget Sound rain away from foundations, with leaf guards for the needle and maple-leaf debris that clogs them. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, shops, churches, carports and light commercial buildings across Pierce County, from valley farm buildings near the river bottoms to industrial buildings along the tideflats, with durable panel systems, insulation options and repairs. |
Indicative rates based on typical project size, your exact quote depends on scope, materials, and site access. Free estimate, no commitment. See full pricing guide →
Metal Roofing in Tacoma · Response within 24h · No commitment · ☎ (253) 276-7144
Your Free Quote Request