Serving the Tacoma area  ·  (253) 276-7144  ·  Open Mon-Sun 7am-7pm
📞 (253) 276-7144 Free Quote

Metal Roofing in Edgewood, WA (98354) · Local Professionals

Tacoma Metal Roofing · Fast response in Edgewood and the Tacoma area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+251Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Edgewood sits on the hills and valley edges between Tacoma and Puyallup, where the wind comes off the valley and hits exposed slopes hard. The mix of older ranches, split-levels, and newer two-story homes on large, wooded lots means roofs here take a beating from rain, moss, and falling limbs. If you live near Edgemont Park or along Meridian Avenue, you know exactly what we mean.

Homeowners in Edgewood (98354) call Tacoma Metal Roofing because we understand the local conditions: marine air, constant moisture, and wind that peels back shingles and loosens fasteners. We are fully insured and based in Tacoma, so we know the neighborhoods and the building departments. When you need a roof that holds up, we are the team to call.

Metal Roofing in Edgewood (98354)

Edgewood is a mix of hillside and valley-edge properties, many with mature Douglas fir and cedar that drop needles and limbs. The terrain means water runs fast down slopes, and drainage around foundations can be tricky. Older homes often have low-pitched roofs with composition shingles that are prone to moss and algae on north-facing slopes. Newer subdivisions have steeper pitches but still face wind-driven rain. Metal roofing works well here because it sheds water, resists moss, and handles wind uplift better than shingles.

Our team has installed, repaired, and replaced metal roofs across Edgewood and the surrounding areas, from standing seam on modern homes to corrugated panels on shops and barns. We know the local permit requirements and the inspection process, and we plan for tight lot access and steep grades.

Our services in Edgewood

How a Job Works in Edgewood

Step 1: You call us at (253) 276-7144 or request a free estimate online. We schedule an on-site assessment at your convenience, inspect your roof and attic, and discuss your options. We provide a written estimate with clear pricing and no surprises.

Step 2: Once you approve, we pull the necessary permits from the City of Edgewood and schedule the work. Our crews are experienced with tight access and steep slopes, and we protect your landscaping and siding during installation. We keep you informed at every stage.

Step 3: After the work is done, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you are satisfied. We do not leave until you are happy.

Pricing for metal roofing in Edgewood depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. We offer free estimates so you can get an accurate price for your specific project. Call us at (253) 276-7144 to schedule yours.

My roof is on a hillside in Edgewood and gets hammered by wind. What metal roof system holds up best?
For exposed hillside homes in Edgewood, we often recommend standing seam metal roofing because it has concealed fasteners and interlocking panels that resist wind uplift. We also assess your roof pitch and exposure to determine the best profile. Our team can evaluate your specific site and recommend the right system.
A storm just knocked limbs onto my roof in Edgewood. How fast can you respond for emergency repair?
We offer free inspections for storm and wind damage in Edgewood. Call us at (253) 276-7144 and we will schedule a prompt assessment. We prioritize active leaks and structural damage to prevent further issues.
What is the typical cost for a metal roof repair in Edgewood?
Most metal roof repairs in Edgewood start at $450, but the final cost depends on the extent of damage, access, and materials needed. We provide a free estimate so you know the price before we start.
Do I need a permit for a metal roof replacement in Edgewood?
Yes, roofing permits are commonly required for a full replacement or re-roof in Edgewood. The City of Edgewood Building Department handles permitting, and requirements can vary. We manage the permit process for you to ensure compliance.
My HOA has design rules for roofing in Edgewood. Can you help with approval?
We are familiar with HOA design review processes in Edgewood and can provide material samples and specifications to help you get approval. We also respect property lines and coordinate with neighbors if access is needed.
Are you fully insured for roofing work in Edgewood?
Yes, we are fully insured with general liability and workers' compensation coverage.
How often should I inspect my metal roof in Edgewood for moss or loose fasteners?
We recommend an annual inspection, especially after winter storms. In Edgewood's damp climate, moss and algae can grow on north slopes, and fasteners can loosen over time. A yearly check helps catch small issues before they become leaks.
Why choose us?

Trusted professionals in Tacoma

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tacoma

All your work handled by qualified professionals in Tacoma

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

251+ Verified Client Reviews in Tacoma

⭐⭐⭐⭐⭐ 4.9/5 · 251 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tacoma · Response within 24h · No commitment · ☎ (253) 276-7144

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tacoma ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm