Licensed & Insured, in Tacoma and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Tacoma
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (253) 276-7144 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Tacoma and surrounding areas · On-site visits included · Free estimate within 24h
Tacoma Metal Roofing is a team of local certified professionals based in Tacoma. We respond quickly in Tacoma and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (253) 276-7144⭐⭐⭐⭐⭐ 4.9/5 · 251 verified Google reviews
“Had them put a metal roof on our detached garage, about 600 square feet. Crew of three knocked it out in a day and a half and the cleanup was so good I couldn't even find stray screws in the grass. Really relieved to finally have that done.”
Metal Roof Installation
“We wanted the copper awning over our front door redone to match the brick, and these guys clearly knew what they were doing with specialty metal. The seams are tight, the patina already looks great, and they treated our 1920s house with real care. Worth every penny.”
Copper & Specialty Metal Roofing
“Our old barn roof was leaking in three spots and I figured it was a goner. They re-fastened panels, replaced a bunch of screws, and fixed the flashing around the cupola instead of pushing a full replacement. Honest work at a fair price, I'll use them again for the shop building.”
Commercial & Agricultural Metal Roofing
“Standing seam install on our 2,200 sq ft house. The crew was polite, showed up when they said they would, and the dark bronze finish looks amazing against the trees. Only gripe is they started a couple days later than originally quoted, but the work itself is flawless.”
Standing Seam Metal Roofing
“Water was coming in around our chimney every time it rained hard. They found the failed flashing, replaced it, and sealed everything up properly. Two storms since and not a drop inside. Grateful I called them instead of messing with it myself.”
Chimney & Skylight Repair
“Full replacement on our ranch house, and honestly it looks like a brand new home. They tore off the old roof, cleaned up every single day, and finished in four days flat. The foreman walked me through everything at the end, no surprises on the invoice either.”
Metal Roof Replacement
“Called them for an inspection after a windstorm and they were out within two days. Turned out a few panels had loosened and some screws were backing out, so they re-fastened everything and replaced the damaged ones on the spot. Quick, fair, and no upsell pressure.”
Metal Roof Inspection
“We went with the retrofit over our existing shingles to save money and I was skeptical, but the crew explained the whole process and the finished roof is solid and quiet. Took them about three days on our 1,800 sq ft place. The gutters they added for the metal roof were a nice touch too. Would recommend.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in Tacoma · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $8/sq ft | Includes synthetic underlayment, concealed fasteners and standard flashing; steep pitch or complex hips raise the rate. |
| Exposed fastener R-panel | Starting at $6/sq ft | Includes panels, underlayment and closures; shops and outbuildings price lower than finished homes. |
| Full tear-off and replacement | On estimate | Deck condition, number of old layers and disposal access all need an on-site look before quoting. |
| Metal shingle or stone-coated steel | On estimate | Premium profiles and historic district details require panel layout planning and design review before pricing. |
| Travel | Included | in Tacoma and surrounding Pierce County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (253) 276-7144, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, simple gable roof | Starting at $10/sq ft | Includes tear-off, underlayment, panels, and standard flashing on a walkable pitch with few penetrations. |
| Standing seam, cut-up or steep roof | Starting at $14/sq ft | Covers dormers, valleys, and steep pitches that slow the crew and require more custom flashing work. |
| Standing seam over existing shingles (retrofit) | On estimate | Needs an on-site look to confirm existing layers, deck condition, and code limits before pricing. |
| Copper or zinc accent panels | On estimate | Specialty metal pricing depends on current material cost and the size of the accent area. |
| Travel | Included | In Tacoma and surrounding Pierce County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (253) 276-7144, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal roof replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment, and a complete new metal system |
| Complex roof replacement | On estimate | Steep pitch, dormers, multiple hips, and copper accents raise labor and material cost |
| Decking repair | Priced after tear-off | Soft or rotten boards found under the old roof are repaired before the new metal goes on |
| Historic or HOA review | Included in scope | We coordinate profile and color choices with design review requirements before ordering |
| Estimate | Free | Response within 24 hours at (253) 276-7144, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic exposed-fastener retrofit | Starting at $7/sq ft | Covers single-layer shingle roofs with sound decks, includes underlayment, trim, and standard flashing. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed-clip panels over existing shingles, priced higher for panel profile and clip labor. |
| Stone-coated steel or metal shingle retrofit | Starting at $13/sq ft | Includes granule-coated or stamped panels, higher material cost and more cutting at valleys and hips. |
| Complex roof with dormers or steep pitch | On estimate | Steep pitch, multiple penetrations, and tight tree access need an on-site look before pricing. |
| Deck repair or partial sheathing replacement | Quoted per sheet | Rotten sheathing found during inspection is replaced before the retrofit goes down, priced by the sheet. |
| Estimate | Free | On-site walk-through and written scope, response within 24 hours at (253) 276-7144. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (fasteners, sealant, small penetration) | Starting at $450 | Covers a small scope such as resealing one penetration or replacing a short run of failed screws. |
| Single panel replacement | Starting at $850 | Includes matching profile and gauge, new fasteners, and resealing; pitch and access move the price. |
| Flashing and penetration repair | Starting at $650 | Rebuilds chimney, skylight, or sidewall flashing; height and roof pitch drive the labor. |
| Storm damage repair | On estimate | Needs an on-site look to count panels, check decking, and document damage for insurance. |
| Travel | Included | In Tacoma and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (253) 276-7144, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted leak repair (single breach) | Starting at $450 | Includes diagnosis, water test, and one fastener or sealant repair; access and pitch move the price. |
| Flashing rebuild (chimney, skylight, wall) | Starting at $650 | Covers removal of old flashing and new formed metal; height and penetration count affect cost. |
| Multiple leaks in one visit | On estimate | Priced per breach after diagnosis; we confirm the full scope before any work starts. |
| Emergency tarp and temporary seal | Starting at $350 | Secures an active leak after a storm; permanent repair is scheduled and priced separately. |
| Travel | Included | In Tacoma and surrounding Pierce County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (253) 276-7144, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers a focused repair on one slope, including new screws and washers where fasteners have backed out. |
| Full slope re-fastening | Starting at $1,450 | Replaces every fastener on the weather side; square footage and roof pitch drive the final number. |
| Oversized fastener retrofit | Starting at $1,100 | Steps up screw diameter where holes have wallowed out; corrosion and snapped screws add labor time. |
| Panel and closure reset | On estimate | Lifting panels to reset closures and butyl needs an on-site look at panel condition and access. |
| Travel | Included | In Tacoma and surrounding Pierce County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (253) 276-7144, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (basic) | Starting at $5.50/sq ft | Includes panels, underlayment, fasteners, and standard closures on a simple roof. |
| R-panel roof (residential) | Starting at $6.50/sq ft | Includes R-panel, color-matched screws, and ridge and eave closures. |
| Retrofit over existing shingles | On estimate | Purlins and recovery board add cost; we verify code limits on existing layers. |
| Tear-off and disposal | On estimate | Depends on roof size, number of layers, and haul-off distance to the transfer station. |
| Travel | Included | In Tacoma and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (253) 276-7144, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Shake-profile steel shingle | Starting at $9/sq ft | Includes tear-off, synthetic underlayment, and standard flashing on an accessible single-story roof. |
| Slate-profile steel shingle | Starting at $11/sq ft | Includes premium panel profile and color match for historic districts, plus custom hip and ridge caps. |
| Stone-coated steel shingle | Starting at $10/sq ft | Includes granule-coated panels and full underlayment; price rises with roof pitch and dormer count. |
| Complex or steep-pitch job | On estimate | Steep roofs, multiple valleys, dormers, and chimney flashing need an on-site walk before we price. |
| Travel | Included | In Tacoma and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (253) 276-7144, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof replacement | Starting at $9/sq ft | Includes tear-off, underlayment, standard flashing, and disposal; pitch and deck condition move the price. |
| Stone-coated steel over existing shingles | Starting at $7/sq ft | Includes panels and underlayment over one existing layer; local code limits layers and deck condition matters. |
| Complex or steep-pitch installation | On estimate | Steep pitches, multiple chimneys, and tight North End lots need an on-site look before pricing. |
| Travel | Included | In Tacoma and surrounding Pierce County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (253) 276-7144, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accents and flashing | Starting at $20/sq ft | Includes hand-formed copper for bay windows, porch ceilings, and chimney flashing, priced by the piece and the access. |
| Zinc architectural roof | Starting at $22/sq ft | Includes concealed-fastener zinc panels, underlayment, and separation membrane, with height and seam complexity moving the price. |
| Full copper roof | Starting at $28/sq ft | Includes full tear-off, deck inspection, hand-formed copper pans, and soldered seams, with roof size and profile driving the total. |
| Custom fabrication | On estimate | Curved bays, turrets, and original profiles need on-site measurement and shop time before a number is given. |
| Travel | Included | in Tacoma and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (253) 276-7144, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard coating system | Starting at $2.50/sq ft | Includes wash, rust treatment, and two coats on a sound roof in normal condition. |
| Heavy rust or corrosion prep | Starting at $3.75/sq ft | Adds hand-scrubbing, rust converter, and spot priming on pitted panels and edges. |
| Steep or complex roof access | On estimate | Multiple gables, height, and staging requirements raise labor before any coating is applied. |
| Fastener replacement add-on | Quoted per screw | Failed screws and seals get replaced before coating so the system actually holds. |
| Travel | Included | in Tacoma and surrounding Pierce County cities, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (253) 276-7144, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration flashing repair | Starting at $600 | Includes access, removal of old flashing, new bent metal, and water test at one chimney, skylight, or vent. |
| Skylight curb flashing rebuild | Starting at $950 | Includes curb inspection, new underlayment around the opening, and custom-bent curb and step flashing. |
| Chimney cricket and counter-flashing | Starting at $1,200 | Includes building a new cricket, tying counter-flashing into masonry, and re-lapping surrounding panels. |
| Multiple penetration re-detail | On estimate | Scope depends on how many penetrations leak, roof pitch, panel type, and how much underlayment needs replacement. |
| Travel | Included | In Tacoma and surrounding Pierce County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (253) 276-7144, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pad guards on a single entry | Starting at $1,200 | Covers one run of pad guards over a walkway or entry, including clamps and fasteners. |
| Bar-style snow rails | Starting at $1,800 | Longer runs on steep roofs; price moves with linear feet and roof height. |
| Heat cable and controller | Starting at $1,500 | Gutter and downspout cable on a GFCI circuit, including controller and testing. |
| Complex or large-scale job | On estimate | Multi-story roofs, multiple elevations, or historic districts need an on-site look first. |
| Travel | Included | In Tacoma and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (253) 276-7144, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage report | Free | Full photo documentation and written repair versus replacement recommendation, no obligation |
| Minor storm repair (fasteners, seams, flashing) | Starting at $350 | Includes resealing, screw replacement, and flashing repair on accessible roof sections |
| Panel replacement (single slope or section) | Starting at $850 | Includes matched panel, deck inspection, and underlayment repair where needed |
| Emergency tarping and stabilization | Starting at $450 | After-hours response to stop active leaks and secure loose panels |
| Complex or large-scale storm damage | On estimate | Multi-slope damage, deck replacement, or insurance claim work needs an on-site assessment |
| Estimate and claim documentation | Free | Response within 24 hours at (253) 276-7144, photos and scope included |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Full walk inspection with photo report, fastener and flashing check included. |
| Exposed-fastener screw audit | Starting at $250 | Screw-by-screw review on corrugated and R-panel roofs, priced by roof size and pitch. |
| Pre-purchase or insurance report | Starting at $350 | Written condition report with remaining service life, documentation time drives the price. |
| Steep or complex roof inspection | On estimate | Dormers, multiple valleys, and tall two-story access need an on-site look first. |
| Travel | Included | In Tacoma and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (253) 276-7144, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum K-style gutter | Starting at $9/linear ft | Includes on-site forming, hidden hangers, and standard downspouts; taller eaves and fascia repair raise the rate. |
| Half-round steel or aluminum | Starting at $14/linear ft | Period-correct profile with exposed brackets for older homes; steep roof pitch and custom colors add cost. |
| Leaf guard installation | Starting at $6/linear ft | Mesh or screen matched to needle and leaf load; heavy fir canopy and long runs move the price up. |
| Downspout and drainage routing | Starting at $12/linear ft | Buried line, dry well, or splash block; steep hillside lots and long runs take more labor and materials. |
| Complex or large-scale job | On estimate | Multi-story access, historic profiles, and full-house replacements need an on-site look before we quote a number. |
| Estimate | Free | Response within 24 hours at (253) 276-7144, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Screw replacement and re-fastening | Free estimate | Covers new screws, washers and closure strips; price moves with fastener count and roof access. |
| Leak repair and flashing | Starting at $450 | Includes leak diagnosis, flashing rebuild and sealant; cost rises with penetration count and pitch. |
| Exposed-fastener R-panel re-roof | Starting at $9.50 per sq ft | Includes tear-off, underlayment and new panels; price moves with pitch, insulation and staging access. |
| Standing seam commercial roof | On estimate | Concealed-fastener system priced after measuring purlin spacing, pitch and flashing scope on site. |
| Travel | Included | In Tacoma and surrounding Pierce County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (253) 276-7144, no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Tacoma need a crew that understands this city's steep hillsides, heavy tree canopy, and marine climate. Tacoma Metal Roofing is that local resource, connecting you with a network of licensed, insured local contractors who install, replace, and repair metal roofs across the city and surrounding areas. From the Victorian and Craftsman homes of the North End to the post-war ranches of South Tacoma and the waterfront properties in Browns Point, we match the right metal system to the home, the pitch, and the tree cover above it.
Our core work covers Metal Roof Installation, full replacement and re-roofs, and repairs on everything from steep mountain pitches to low-slope additions. We serve Tacoma, University Place, Fircrest, Ruston, Fife, and the surrounding Pierce County communities, including the large stock of aging screw-down roofs that need fastener service. If you are tired of patching a failing roof, call (253) 276-7144 for straight guidance on repair versus replacement.
When a metal roof starts leaking, the cause is usually one of a few familiar failure points. On 15 to 30 year old exposed-fastener roofs, the number one culprit is fasteners backing out as their EPDM sealing washers dry, shrink, and crack, letting water slip past the screw head. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are close behind. Wind-lifted panels after a south windstorm and punctures from fallen Douglas fir or maple limbs round out the list. Our Metal Roof Leak Repair team tracks each leak to its actual source rather than smearing sealant over the symptom.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so what looks like a minor drip can rot sheathing, saturate insulation, and stain ceilings well away from the breach. We open the assembly, find the path, and repair the failed fastener, seam, boot, or flashing properly. In many cases a full Screw Replacement & Re-Fastening service restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right call and when it is not.
Our repair-versus-replace guidance is honest: if the panels are sound and the leaks trace to fasteners and flashing, repair usually wins. If the metal is perforated, the seams are failing across the field, or the decking is soft, replacement may cost less over time. For urgent leaks, storm damage, or a roof you are not sure about, call (253) 276-7144 or request a free estimate and we will inspect, document, and explain your options without pressure.
We install the full range of metal systems and match each one to the home. Standing Seam Metal Roofing uses concealed clips and hidden fasteners for a clean, premium roof with no exposed screws to maintain. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, shops, and carports. Metal Shingle Roofing and Stone-Coated Steel Roofing mimic shake and tile on older neighborhoods, while Copper & Specialty Metal Roofing adds accents on bay windows and porches.
The honest comparison is simple: standing seam costs more up front and has no exposed screws to service, while screw-down costs less and needs its fasteners checked and replaced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate way to save on tear-off; when it is not, a full Metal Roof Replacement with new underlayment is the right answer. We will tell you which applies to your roof.
Metal roof cost in Tacoma is typically quoted per square foot for installations, while repairs are often flat-rate. Your price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame every figure as a typical range, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, though that is never a guarantee. See our pricing page for the factors that shape a quote.
For a real number, request a free estimate or a free roof inspection. We will measure, check the deck and flashing, and give you a written scope with repair and replacement options side by side so you can compare honestly.
After a windstorm or limb strike, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. Our role is accurate documentation of the damage, nothing more.
On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, always verify with the Tacoma building or planning department before starting your project. For help understanding the process, contact us.
Ready to get started? Tacoma Metal Roofing serves in Tacoma and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Tacoma · Response within 24h · No commitment · ☎ (253) 276-7144
Your Free Quote Request