Serving the Tacoma area  ·  (253) 276-7144  ·  Open Mon-Sun 7am-7pm
📞 (253) 276-7144 Free Quote

Metal Roofing in Sumner, WA (98390) · Local Professionals

Tacoma Metal Roofing · Fast response in Sumner and the Tacoma area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+251Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Sumner feels like a small town that happens to sit in the middle of the Puyallup Valley, with the historic downtown grid on one side of the river and farm fields and newer subdivisions on the other. The housing stock runs from early 1900s Craftsman bungalows near Main Street to 1990s and 2000s two-story homes off East Valley Highway, and a lot of the older roofs are still cedar shake or worn composition. Metal is showing up more often here because it handles the valley's wet winters and the moss that loves our north slopes.

We're Tacoma Metal Roofing, and we serve Sumner from just up the road in Tacoma. If you've driven past the Sumner Skate Park or the old downtown core, you've seen the mix we work with: tight lots, steep pitches, and barns and shops out on the valley floor that need a roof that won't quit. Call us at (253) 276-7144 for a free estimate.

Metal Roofing in Sumner (98390)

Sumner sits low in the Puyallup River valley, which means two things for roofs: a lot of moisture hanging in the air and a lot of moss and algae pressure, especially on north-facing slopes and under the big Douglas fir and maple canopies that shade older neighborhoods. Downtown lots are narrow with mature landscaping, so access can be tight and we plan staging carefully. Out toward the valley floor, shops, barns, and agricultural buildings need corrugated and ribbed panel systems that shed water fast and stand up to wind. The historic downtown area has design review considerations, and some of the older homes have multiple roof layers that affect whether a retrofit over shingles is even allowed. We check all of that before we quote.

Our team has worked across Pierce County for years, from Stadium District Victorians to valley farm buildings, and we bring that same approach to Sumner: inspect the deck, figure out what the roof is actually doing, and recommend the metal system that fits the house and the budget.

Our services in Sumner

How a Job Works in Sumner

Step 1: You call (253) 276-7144 or request a free estimate. We schedule an on-site assessment, walk the roof and attic if accessible, check flashing, fasteners, and deck condition, and talk through options like standing seam, metal shingle, or a retrofit over existing shingles. You get a written scope and price before any work starts.

Step 2: We pull the required permits through the City of Sumner building department and coordinate any historic district or HOA review. On install day, our insured crew protects landscaping and siding, stages materials on tight downtown lots, and works around your schedule. For valley properties, we plan for wind exposure and fasten panels to spec.

Step 3: We clean up completely, haul away old materials, and do a final walkthrough with you. We make sure gutters, flashing, and penetrations are right and that you know how to care for the new roof.

Pricing in Sumner depends on roof size, pitch, access, and condition. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation around $8, standing seam around $10, and metal shingle or stone-coated steel around $9. A retrofit over existing shingles starts around $7 per square foot, but code limits how many layers you can cover, so we verify that first. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or chimney repair around $600. Coating and painting starts around $2.50 per square foot. Every roof is different, so call (253) 276-7144 for a free estimate and a real number.

My 1920s bungalow near downtown Sumner has two layers of old shingles. Can you still do a metal roof over them?
Maybe, but it depends on code and the condition of the deck. Sumner follows state and local rules that limit how many existing layers you can cover, and we won't retrofit over a soft or damaged deck. We inspect first and tell you honestly whether a tear-off or a retrofit is the right call.
A windstorm just peeled back panels on my shop out on the valley floor. How fast can you get out?
We prioritize storm and wind damage calls in Sumner and the surrounding valley. Call (253) 276-7144 and we'll schedule an inspection, often same or next day depending on volume. We can secure the roof, document damage for insurance, and schedule permanent repairs.
What does a typical metal roof cost for a 1,500 square foot ranch in Sumner?
For a simple ranch, corrugated panel might land in the $8,000 to $12,000 range installed, while standing seam runs higher, often $15,000 and up, depending on pitch, access, and trim. These are ballparks. We give a firm written price after seeing the roof.
Do I need a permit from the City of Sumner for a metal roof replacement?
In most cases yes, a roofing permit is required for a full replacement or re-roof, and inspection requirements vary. We handle the permit application and coordinate inspections with the City of Sumner building department so you don't have to.
My neighbor's tree limbs hang over my roof line. What are my options if I want a metal roof?
Property line and tree issues are civil matters between neighbors, so we can't trim beyond your line. We can design the roof and flashing to handle overhanging limbs, and if you're in an HOA, we'll coordinate color and profile approval before ordering materials.
Are you fully insured for work at my Sumner property?
Yes. We carry general liability insurance and workers' compensation coverage for our crews.
What maintenance does a metal roof need in Sumner's climate?
Plan on an annual inspection, ideally in fall before the rainy season. We check fasteners, clear debris from valleys and gutters, and look for moss or algae on north slopes. Keeping fir needles and leaves off the roof is the biggest thing you can do between visits.
Why choose us?

Trusted professionals in Tacoma

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tacoma

All your work handled by qualified professionals in Tacoma

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

251+ Verified Client Reviews in Tacoma

⭐⭐⭐⭐⭐ 4.9/5 · 251 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tacoma · Response within 24h · No commitment · ☎ (253) 276-7144

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tacoma ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm