Serving the Tacoma area  ·  (253) 276-7144  ·  Open Mon-Sun 7am-7pm
📞 (253) 276-7144 Free Quote

Metal Roofing in DuPont, WA (98327) · Local Professionals

Tacoma Metal Roofing · Fast response in DuPont and the Tacoma area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+251Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

DuPont is a small city with a big history, tucked between Joint Base Lewis-McChord and the Nisqually Reach, where planned neighborhoods like Northwest Landing and the older homes near Center Drive sit on compact lots with tight setbacks. The housing stock here is mostly newer construction from the 1990s and 2000s, with a mix of two-story traditional and Craftsman-style homes that were built with composition roofs now reaching the end of their service life.

Homeowners in DuPont (98327) call Tacoma Metal Roofing because we understand the specific challenges of roofing in this marine climate: constant moisture, moss on north slopes, and wind-driven rain that finds every gap. Whether you are near DuPont Elementary or over by the golf course, we provide honest assessments and metal roofing systems built to last.

Metal Roofing in DuPont (98327)

DuPont's terrain is relatively flat compared to the hills of Tacoma, but the planned nature of neighborhoods like Northwest Landing means lots are often narrow with shared driveways and mature landscaping that can limit access. Many homes here have low-pitch roofs that are prone to moss and algae growth due to shade from neighboring houses and the long wet winters. The soil is a mix of glacial till and fill, which can affect drainage around foundations, so proper gutter and downspout design is critical. We often see failed flashing at chimney and skylight penetrations, and wind-lifted panels after the occasional southerly storm that funnels through the Nisqually Valley.

Our team has been serving DuPont and the surrounding Pierce County area for years, and we know the local building department requirements and HOA design standards that apply in planned communities. We have worked on homes near PowderWorks Park and along the Sequalitchew Creek trail, and we understand the importance of matching roof profiles and colors to keep your home looking cohesive with the neighborhood.

Our services in DuPont

How a Job Works in DuPont

Step 1: You call us at (253) 276-7144 or request a free estimate online. We schedule an on-site assessment at your DuPont home, where we inspect your existing roof, attic ventilation, flashing, and gutters. We take photos and explain what we find, then provide a written estimate with options for repair, replacement, or retrofit over existing shingles if your roof qualifies.

Step 2: Once you approve the estimate, we handle the permit application with the City of DuPont and coordinate with your HOA if design review is required. On installation day, our insured crew arrives with materials and protects your landscaping and driveway. For tight lots in Northwest Landing, we stage materials carefully and use smaller equipment to avoid damage. We install your new metal roof, including underlayment, flashing, and gutters, with attention to proper fastening for wind resistance.

Step 3: After the work is complete, we clean up thoroughly, magnet-sweep for nails, and walk the property with you to ensure everything meets your expectations. We do not leave until you are satisfied and we have reviewed maintenance tips for your new metal roof.

Pricing for metal roofing in DuPont depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical 1,800 to 2,200 square foot home, metal roof installation starts around $8 per square foot, standing seam from $10 per square foot, and metal roof replacement from $9 per square foot. If your home has existing shingles in good condition, a retrofit over shingles can start at $7 per square foot, but this is subject to code limits on layers. Repairs for leaks or damaged flashing start at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. We provide free estimates and will give you a clear, written price before any work begins. Call (253) 276-7144 to schedule your assessment.

My home in Northwest Landing has a low-pitch roof that gets moss every year. Will a metal roof solve that?
Yes, metal roofs are an excellent choice for low-pitch roofs because they shed water quickly and do not hold moisture like asphalt shingles. We recommend a standing seam or corrugated panel with a factory finish that resists algae and moss. Proper attic ventilation and gutter sizing are also key, and we can evaluate your whole system during a free estimate.
A windstorm just peeled back some panels on my roof near DuPont Elementary. How fast can you respond?
We prioritize storm damage calls and can often schedule an inspection within 24 to 48 hours. Call us at (253) 276-7144 and we will assess the damage, tarp any open areas if needed, and provide a repair estimate. We work with your insurance company by documenting the damage with photos and detailed reports, but coverage and deductibles are determined by your policy.
What is the typical cost to replace a roof on a 2,000 square foot home in DuPont?
For a standard 2,000 square foot home with a moderate pitch, a metal roof replacement typically ranges from $18,000 to $24,000 depending on the material (corrugated, standing seam, or stone-coated steel), accessibility, and whether gutters are included. We provide a free estimate with a detailed breakdown so you can see exactly what is included.
Do I need a permit from the City of DuPont to replace my roof?
Yes, a roofing permit is generally required for a full replacement or re-roof in DuPont. The City of DuPont Building Department reviews permits and may require an inspection. We handle the permit application for you and ensure the work meets current codes. Requirements can change, so we always verify with the city before starting.
My HOA requires approval for roof color changes. Can you help with that process?
Absolutely. We are familiar with HOA design review processes in DuPont's planned communities. We can provide product samples, color chips, and specification sheets for your HOA submission. If your project is near a property line, we also ensure flashing and drainage are directed appropriately to avoid neighbor disputes.
Are you insured for roofing work at my DuPont property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in the unlikely event of an accident during the project.
What maintenance does a metal roof need in DuPont's climate?
Metal roofs are low maintenance, but in our wet climate we recommend an annual inspection of fasteners, seals, and gutters, especially after fall leaf drop. Keep debris off the roof and ensure downspouts drain away from the foundation. We offer maintenance plans and can check your roof as part of a free estimate.
Why choose us?

Trusted professionals in Tacoma

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tacoma

All your work handled by qualified professionals in Tacoma

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

251+ Verified Client Reviews in Tacoma

⭐⭐⭐⭐⭐ 4.9/5 · 251 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tacoma · Response within 24h · No commitment · ☎ (253) 276-7144

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tacoma ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm