Serving the Tacoma area  ·  (253) 276-7144  ·  Open Mon-Sun 7am-7pm
📞 (253) 276-7144 Free Quote

Metal Roofing in Gig Harbor, WA (98332) · Local Professionals

Tacoma Metal Roofing · Fast response in Gig Harbor and the Tacoma area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+251Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Gig Harbor is a waterfront town where the hills rise steeply from the harbor and the trees never stop dropping things. From the historic downtown core along Harborview Drive to the wooded hillsides of Canterwood and the newer subdivisions off Borgen Boulevard, homes here face salt air, steady rain, and limbs that come down in every winter windstorm. If your roof is showing its age, we can help.

Homeowners in Gig Harbor (98332) call Tacoma Metal Roofing because we know what this marine climate does to a roof. The constant moisture, the moss on north slopes, the salt spray near the water, and the Douglas fir needles that clog gutters and trap moisture against shingles. We have seen it all, and we install metal roofing systems that are built to handle it.

Metal Roofing in Gig Harbor (98332)

Gig Harbor properties are not one-size-fits-all. Downtown and the Millville area have older cottages and bungalows on tight lots where access is tricky and every inch counts. Up the hills in Canterwood and along Peacock Hill, you have larger homes with steep pitches and long driveways where staging materials takes planning. Out toward Artondale and Rosedale, there are ranches and split-levels with low-slope roofs that are prone to moss and algae. And all over town, mature evergreens and big-leaf maples drop needles and branches that scratch and dent asphalt shingles and clog valleys. Metal roofing solves a lot of these problems: it sheds debris, resists moss, and stands up to falling limbs better than any shingle. Our team has installed standing seam, corrugated panels, metal shingles, and stone-coated steel on Gig Harbor homes from the waterfront to the backcountry. We know the local building department requirements, the HOA design guidelines in the planned communities, and the wind exposure near the water. We also handle storm and wind damage repair when a limb punches through or a panel lifts.

We have been serving Gig Harbor and the surrounding Tacoma area for years, and we understand the specific challenges of roofing here. Whether you need a full replacement, a repair after a storm, or a retrofit over your existing shingles, we can help.

Our services in Gig Harbor

How a Job Works in Gig Harbor

Step 1: You call us at (253) 276-7144 or request a free estimate online. We will schedule a time to come out and inspect your roof, whether you are in downtown Gig Harbor, out in Canterwood, or anywhere in between. We will assess the condition of your current roof, check for leaks, damaged flashing, or loose fasteners, and talk with you about your options. You will get a written estimate with clear pricing and no surprises.

Step 2: Once you approve the estimate, we will schedule the work. In Gig Harbor, that often means coordinating with your HOA for color and profile approval, and pulling the required permit from the city or Pierce County. We will handle the paperwork. On the day of installation, our crew will protect your landscaping, set up safely on steep or tight lots, and get to work. We use high-quality underlayment and fasteners designed for marine environments, and we install your new metal roof according to the manufacturer's specifications.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails and screws, haul away all debris, and do a final walkthrough with you to make sure you are satisfied. We do not consider the job finished until you are happy with the result.

Metal roofing in Gig Harbor is priced by the square foot, and the final cost depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Metal roof repair starts at $450, and leak repair also starts at $450. Screw replacement and re-fastening starts at $750. For a more specialized look, metal shingle and stone-coated steel start at $9 per square foot, and copper or specialty metal starts at $20 per square foot. Metal roof coating and painting starts at $2.50 per square foot. We also handle flashing, chimney, and skylight repair starting at $600, and gutters for metal roofs start at $9 per linear foot. Every roof is different, so call us at (253) 276-7144 for a free estimate tailored to your Gig Harbor home.

My house is on a steep, wooded lot in Gig Harbor and gets hammered by fir needles and branches. What metal roof system works best?
For wooded lots with heavy debris, we usually recommend standing seam metal roofing with a smooth finish. The panels have no exposed fasteners, so there is nothing for needles to catch on, and debris slides off easily. We can also install a heavier gauge panel to resist denting from falling limbs. In areas with lots of shade and moisture, we add a high-quality underlayment and consider a peel-and-stick membrane at the eaves to prevent ice damming and wind-driven rain infiltration. We will assess your specific tree cover and roof pitch during the free estimate.
A windstorm just lifted some panels on my roof in Gig Harbor. Can you come out quickly for storm damage repair?
Yes. Storm and wind damage repair is one of our core services, and we offer free inspections for storm damage. Call us at (253) 276-7144 and we will schedule a visit as soon as possible. We will secure the roof to prevent further water intrusion, document the damage for your insurance claim if applicable, and provide a written estimate for the repair. We work with all major insurance carriers and can help you understand the process.
What is the typical cost to replace a roof on a 2,000 square foot house in Gig Harbor with standing seam metal?
For a 2,000 square foot home with a typical roof pitch and complexity, a standing seam metal roof replacement might range from $20,000 to $30,000 or more, depending on the gauge of the metal, the color, the underlayment, and whether there are dormers, valleys, or skylights. Standing seam starts at $10 per square foot, but the final price reflects the specific details of your roof. We provide free, no-obligation estimates so you can get an accurate number for your home.
Do I need a permit to install a metal roof in Gig Harbor, and are there any historic district rules?
Yes, roofing permits are typically required for a full replacement or re-roof in Gig Harbor, and the requirements can vary depending on whether you are in the city limits or unincorporated Pierce County. The City of Gig Harbor Building Department can confirm the exact permit thresholds, fees, and inspection requirements for your address. If your home is in a designated historic district or a neighborhood with design guidelines, there may be additional review for panel profile and color. We are familiar with local permitting and can help guide you through the process.
My HOA requires approval for roof color and style. Can you help with that, and what if my neighbor's tree branches hang over my roof?
Yes, we can provide the documentation your HOA needs, including manufacturer color samples, product specifications, and installation details, and we can coordinate with your HOA board to streamline approval. As for overhanging branches, property line disputes are a civil matter, but we can advise you on how to protect your roof. We can install a metal roof that resists damage from limbs, and we can also trim back branches that are clearly on your property. If a neighbor's tree causes damage, your insurance company can advise you on your rights.
Are you fully insured for roofing work in Gig Harbor?
Yes, we are fully insured, carrying both general liability insurance and workers' compensation coverage. This protects you and your property in the unlikely event of an accident or damage during the project.
What maintenance does a metal roof need in Gig Harbor's climate, and when should I schedule it?
Metal roofs are low maintenance, but in Gig Harbor's marine environment, we recommend an annual inspection, ideally in late summer or early fall before the rainy season. We check for loose fasteners, debris accumulation in valleys and gutters, and any signs of sealant wear around flashings and penetrations. Keeping gutters clear of fir needles and leaves is the most important thing you can do. We offer metal roof inspections and can perform any needed maintenance, such as screw replacement or re-fastening, to keep your roof performing for decades.
Why choose us?

Trusted professionals in Tacoma

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tacoma

All your work handled by qualified professionals in Tacoma

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

251+ Verified Client Reviews in Tacoma

⭐⭐⭐⭐⭐ 4.9/5 · 251 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tacoma · Response within 24h · No commitment · ☎ (253) 276-7144

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tacoma ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm